R-SE Rigid Front Bumper

full front bumper 004

The Rigid Front Bumper has a unique contoured design that ensures complete front tire coverage between the bumper and stock fender flares, while adding specific strength in the areas that demand the most. Built out of 3/16” alloy steel and 1/4” mounting plates, we
guarantee this will be the toughest bumper you can find.

Special features include;2 recovery shackle points, integrated light pockets, a 9” drop winch mount to maximize airflow to the radiator and the contoured R-SE Bull Bar.

Optional accesories: LED winch work light, PIAA 520 Lights and the all new Bull Bar LED light brackets made to fit the 20" light bar from Rigid Industires.

If you want aftermarket perks without aftermarket looks- the R-SE Front Bumper is for you!

Available in powder coat or bare steel.

R-SE Part Number: FB-F-100-JK

Product Details

Fits These Vehicles

07-12 Jeep Wrangler 2-Door (JK)
07-12 Jeep Wrangler Unlimited 4-Door (JK)

Parts Included

Front Bumper
Installation Hardware

Installation

Front Bumper Installation

Stock Front bumper removal

Remove plastic bumper valance/ skid plate. Use 18mm socket to remove 8 nuts on front
bumper. Do not remove bumper until you have undone the light wire harness and lights.
Failure to do so can ruin your traction control system. Once you have removed the wire
harness you can remove the front bumper.

Installation of Front Bumper

You have 2 options of mounting your front bumper with a winch option A or B

Option A

Mount the winch on the bumper before mounting the bumper to the vehicle use the
hardware provided with the winch to mount the winch to the bumper. Once you have

mounted the winch, mount the bumper with the hardware provided.

6 - 7/16” x 1” bolts
6 – 7/16” nuts
12 – 7/16” washers

Option B

Use this hardware provided to mount the front bumper.

6 - 7/16” x 1” bolts
6 – 7/16” nuts
12 – 7/16” washers

Mounting Bulbar

Mount the bulbar with 4- 7/16” x 1” bolts provided.

Lights

Use the hardware provided with the lights to mount them. For wiring you can use the
stock light harness and use the stock light switch or you can follow the direction that
came with the lights to hook up to the battery directly and use the switch they provided.